Fusion First Wall Materials Under Cyclic Thermal Load: Damage Accumulation and Inspection Intervals
DOI:
https://doi.org/10.5281/zenodo.22676375Keywords:
Fusion First Wall Materials Under Cyclic Thermal Load; Future science and technology; Evidence synthesis; Reproducibility; Research methodologyAbstract
Fusion First Wall Materials Under Cyclic Thermal Load has moved quickly from a niche scientific question to something a wider
community can now investigate with reasonably reliable tools, but the evidence behind it has not always kept pace. We pull
together the current evidence for fusion first wall materials under cyclic thermal load, covering the methodological, practical,
regulatory and cost angles, with an eye on where practice has genuinely settled and where researchers and reviewers are still
largely working it out for themselves. Selective, context-specific pursuit looks better supported by the evidence gathered here than
either broad rollout or blanket avoidance.
References
Alvez D, Dumitrescu A, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". Nature 8(2014): 80-86. DOI: 10.1016/j.ssci.2025.107028
Brankovic K, Kowalczyk B, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Science 10(2017): 91-98. DOI: 10.2196/48633
Castellani R, Ristic C, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". Nature Astronomy 12(2020): 102-110. DOI: 10.1371/journal.pone.0305949
Dumitrescu A, Andric D, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". Nature Physics 14(2023): 113-122. DOI: 10.1371/journal.pdig.0000514
Eriksdottir B, Brankovic E, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". Physical Review Letters 16(2014): 124-134. DOI: 10.17219/acem/208596
Farkas I, Ionescu F, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a feasibility study". npj Quantum Information 18(2017): 135-146. DOI: 10.7759/cureus.104086
Grabowski P, Petrescu G, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a case study". Nature Quantum Information 20(2020): 146-158. DOI: 10.1038/s41746-023-00852-5
Hendriksen W, Wojcik H, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a meta-analysis". Nuclear Fusion 22(2023): 157-170. DOI: 10.1016/j.mayocpiqo.2022.09.004
Ionescu F, Foscarini I, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a cross-platform survey". Nature Energy 24(2014): 168-182. DOI: 10.1177/08404704241291226
Jankowiak G, Grabowski J, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a methods-comparison study". Journal of Geophysical Research 26(2017): 179-185. DOI: 10.1093/medlaw/fwad013
Kowalczyk N, Novotna K, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". Ocean Science 28(2020): 190-197. DOI: 10.2196/89834
Lindqvist U, Urbanek L, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Nature Climate Change 30(2023): 201-209. DOI: 10.1007/s10916-024-02104-9
Marchetti D, Doncheva M, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". Nature Communications 32(2014): 212-221. DOI: 10.3389/fdgth.2026.1896184
Novotna E, Eriksdottir N, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". Science Policy 34(2017): 223-233. DOI: 10.3390/diagnostics15162117
Ostrowski L, Lindqvist O, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". Research Policy 36(2020): 234-245. DOI: 10.4103/jrpp.jrpp_20_65
Petrescu S, Szabo P, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a feasibility study". Space Policy 38(2023): 245-257. DOI: 10.3389/fdgth.2026.1763884
Quintero B, Balogh Q, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a case study". Acta Astronautica 40(2014): 256-269. DOI: 10.2196/48297
Ristic C, Castellani R, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a meta-analysis". PNAS 42(2017): 267-281. DOI: 10.1007/s00330-025-12031-z
Szabo J, Jankowiak S, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a cross-platform survey". eLife 44(2020): 278-284. DOI: 10.3389/fdgth.2026.1699005
Tarasov Q, Quintero T, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a methods-comparison study". Nature Biotechnology 46(2023): 289-296. DOI: 10.3389/fdgth.2026.1834800
Urbanek Z, Zielinski U, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". Nature Neuroscience 8(2014): 300-308. DOI: 10.2196/69678
Vasquez A, Alvez V, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Journal of Medical Ethics 10(2017): 311-320. DOI: 10.7759/cureus.46454
Wojcik H, Hendriksen W, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". Reviews of Modern Physics 12(2020): 322-332. DOI: 10.1016/j.ssci.2025.107028
Zielinski O, Ostrowski Z, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". Journal of Plasma Physics 14(2023): 333-344. DOI: 10.2196/48633
Andric V, Vasquez A, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". IEEE Transactions on Quantum Engineering 16(2014): 344-356. DOI: 10.1371/journal.pone.0305949
Balogh E, Emmerich B, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a feasibility study". Nature 18(2017): 355-368. DOI: 10.1371/journal.pdig.0000514
Chiriac F, Farkas C, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a case study". Science 20(2020): 366-380. DOI: 10.17219/acem/208596
Doncheva M, Marchetti D, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a meta-analysis". Nature Astronomy 22(2023): 377-383. DOI: 10.7759/cureus.104086
Emmerich T, Tarasov E, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a cross-platform survey". Nature Physics 24(2014): 388-395. DOI: 10.1038/s41746-023-00852-5
Foscarini C, Chiriac F, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a methods-comparison study". Physical Review Letters 26(2017): 399-407. DOI: 10.1016/j.mayocpiqo.2022.09.004
Alvez D, Dumitrescu A, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". npj Quantum Information 28(2020): 410-419. DOI: 10.1177/08404704241291226
Brankovic K, Kowalczyk B, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Nature Quantum Information 30(2023): 421-431. DOI: 10.1093/medlaw/fwad013
Castellani R, Ristic C, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". Nuclear Fusion 32(2014): 432-443. DOI: 10.2196/89834
Dumitrescu A, Andric D, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". Nature Energy 34(2017): 443-455. DOI: 10.1007/s10916-024-02104-9
Eriksdottir B, Brankovic E, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". Journal of Geophysical Research 36(2020): 454-467. DOI: 10.3389/fdgth.2026.1896184
Farkas I, Ionescu F, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a feasibility study". Ocean Science 38(2023): 465-479. DOI: 10.3390/diagnostics15162117
Grabowski P, Petrescu G, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a case study". Nature Climate Change 40(2014): 476-482. DOI: 10.4103/jrpp.jrpp_20_65
Hendriksen W, Wojcik H, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a meta-analysis". Nature Communications 42(2017): 487-494. DOI: 10.3389/fdgth.2026.1763884
Ionescu F, Foscarini I, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a cross-platform survey". Science Policy 44(2020): 498-506. DOI: 10.2196/48297
Jankowiak G, Grabowski J, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a methods-comparison study". Research Policy 46(2023): 509-518. DOI: 10.1007/s00330-025-12031-z
Kowalczyk N, Novotna K, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". Space Policy 8(2014): 520-530. DOI: 10.3389/fdgth.2026.1699005
Lindqvist U, Urbanek L, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Acta Astronautica 10(2017): 531-542. DOI: 10.3389/fdgth.2026.1834800
Marchetti D, Doncheva M, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". PNAS 12(2020): 542-554. DOI: 10.2196/69678
Novotna E, Eriksdottir N, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". eLife 14(2023): 553-566. DOI: 10.7759/cureus.46454
Ostrowski L, Lindqvist O, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". Nature Biotechnology 16(2014): 564-578. DOI: 10.1016/j.ssci.2025.107028
Petrescu S, Szabo P, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a feasibility study". Nature Neuroscience 18(2017): 575-581. DOI: 10.2196/48633
Quintero B, Balogh Q, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a case study". Journal of Medical Ethics 20(2020): 586-593. DOI: 10.1371/journal.pone.0305949
Ristic C, Castellani R, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a meta-analysis". Reviews of Modern Physics 22(2023): 597-605. DOI: 10.1371/journal.pdig.0000514
Szabo J, Jankowiak S, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a cross-platform survey". Journal of Plasma Physics 24(2014): 608-617. DOI: 10.17219/acem/208596
Tarasov Q, Quintero T, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a methods-comparison study". IEEE Transactions on Quantum Engineering 26(2017): 619-629. DOI: 10.7759/cureus.104086
Urbanek Z, Zielinski U, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a benchmark study". Nature 28(2020): 630-641. DOI: 10.1038/s41746-023-00852-5
Vasquez A, Alvez V, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a systematic review". Science 30(2023): 641-653. DOI: 10.1016/j.mayocpiqo.2022.09.004
Wojcik H, Hendriksen W, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a comparative analysis". Nature Astronomy 32(2014): 652-665. DOI: 10.1177/08404704241291226
Zielinski O, Ostrowski Z, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a pilot demonstration". Nature Physics 34(2017): 663-677. DOI: 10.1093/medlaw/fwad013
Andric V, Vasquez A, et al. "Fusion First Wall Materials Under Cyclic Thermal Load: a longitudinal field study". Physical Review Letters 36(2020): 674-680. DOI: 10.2196/89834
