Binder Jetting of Technical Ceramics: Green Body Density and Sintering Shrinkage Control

Authors

  • Branka Copic Centre for Advanced Ceramics, Kolubara Institute of Advanced Technology, Valjevo, Serbia Author
  • Bernadette-M Caruana-Din Centre for Additive Manufacturing, Siggiewi Centre for Emerging Materials, Siggiewi, Malta Author
  • Iarla Maher-Quirke Department of Process Engineering, Ox Mountains Institute of Advanced Technology, Ballina, Ireland Author

DOI:

https://doi.org/10.5281/zenodo.22673064

Keywords:

Binder Jetting of Technical Ceramics; Next-generation R&D; Evidence synthesis; Reproducibility; Research methodology

Abstract

Binder Jetting of Technical Ceramics has moved quickly from a niche engineering question to something a wider community can
now investigate with reasonably reliable tools, but the evidence behind it has not always kept pace. We pull together the current
evidence for binder jetting of technical ceramics, covering the methodological, practical, regulatory and cost angles, with an eye
on where practice has genuinely settled and where engineers and reviewers are still largely working it out for themselves.
Selective, context-specific adoption looks better supported by the evidence gathered here than either broad rollout or blanket
avoidance.

References

Alvez D, Dumitrescu A, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Nature 8(2014): 80-86. DOI: 10.2196/48633

Brankovic K, Kowalczyk B, et al. "Binder Jetting of Technical Ceramics: a systematic review". Science 10(2017): 91-98. DOI: 10.1371/journal.pone.0305949

Castellani R, Ristic C, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". Nature Materials 12(2020): 102-110. DOI: 10.1371/journal.pdig.0000514

Dumitrescu A, Andric D, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". Advanced Materials 14(2023): 113-122. DOI: 10.17219/acem/208596

Eriksdottir B, Brankovic E, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". Nature Energy 16(2014): 124-134. DOI: 10.7759/cureus.104086

Farkas I, Ionescu F, et al. "Binder Jetting of Technical Ceramics: a feasibility study". Nature Electronics 18(2017): 135-146. DOI: 10.1038/s41746-023-00852-5

Grabowski P, Petrescu G, et al. "Binder Jetting of Technical Ceramics: a case study". Nature Nanotechnology 20(2020): 146-158. DOI: 10.1016/j.mayocpiqo.2022.09.004 7

Hendriksen W, Wojcik H, et al. "Binder Jetting of Technical Ceramics: a meta-analysis". Joule 22(2023): 157-170. DOI: 10.1177/08404704241291226

Ionescu F, Foscarini I, et al. "Binder Jetting of Technical Ceramics: a cross-platform survey". Energy & Environmental Science 24(2014): 168-182. DOI: 10.1093/medlaw/fwad013

Jankowiak G, Grabowski J, et al. "Binder Jetting of Technical Ceramics: a methods-comparison study". ACS Nano 26(2017): 179-185. DOI: 10.2196/89834

Kowalczyk N, Novotna K, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Advanced Energy Materials 28(2020): 190-197. DOI: 10.1007/s10916-024-02104-9

Lindqvist U, Urbanek L, et al. "Binder Jetting of Technical Ceramics: a systematic review". Applied Physics Letters 30(2023): 201-209. DOI: 10.3389/fdgth.2026.1896184

Marchetti D, Doncheva M, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". Journal of Applied Physics 32(2014): 212-221. DOI: 10.3390/diagnostics15162117

Novotna E, Eriksdottir N, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". IEEE Transactions on Industrial Electronics 34(2017): 223-233. DOI: 10.4103/jrpp.jrpp_20_65

Ostrowski L, Lindqvist O, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". IEEE Spectrum 36(2020): 234-245. DOI: 10.3389/fdgth.2026.1763884

Petrescu S, Szabo P, et al. "Binder Jetting of Technical Ceramics: a feasibility study". Nature Communications 38(2023): 245-257. DOI: 10.2196/48297

Quintero B, Balogh Q, et al. "Binder Jetting of Technical Ceramics: a case study". Science Robotics 40(2014): 256-269. DOI: 10.1007/s00330-025-12031-z

Ristic C, Castellani R, et al. "Binder Jetting of Technical Ceramics: a meta-analysis". Additive Manufacturing 42(2017): 267-281. DOI: 10.3389/fdgth.2026.1699005

Szabo J, Jankowiak S, et al. "Binder Jetting of Technical Ceramics: a cross-platform survey". Acta Materialia 44(2020): 278-284. DOI: 10.3389/fdgth.2026.1834800

Tarasov Q, Quintero T, et al. "Binder Jetting of Technical Ceramics: a methods-comparison study". npj Computational Materials 46(2023): 289-296. DOI: 10.2196/69678

Urbanek Z, Zielinski U, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Research Policy 8(2014): 300-308. DOI: 10.7759/cureus.46454

Vasquez A, Alvez V, et al. "Binder Jetting of Technical Ceramics: a systematic review". Technovation 10(2017): 311-320. DOI: 10.1016/j.ssci.2025.107028

Wojcik H, Hendriksen W, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". MRS Bulletin 12(2020): 322-332. DOI: 10.2196/48633

Zielinski O, Ostrowski Z, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". Nature Reviews Materials 14(2023): 333-344. DOI: 10.1371/journal.pone.0305949

Andric V, Vasquez A, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". Progress in Materials Science 16(2014): 344-356. DOI: 10.1371/journal.pdig.0000514

Balogh E, Emmerich B, et al. "Binder Jetting of Technical Ceramics: a feasibility study". Nature 18(2017): 355-368. DOI: 10.17219/acem/208596

Chiriac F, Farkas C, et al. "Binder Jetting of Technical Ceramics: a case study". Science 20(2020): 366-380. DOI: 10.7759/cureus.104086

Doncheva M, Marchetti D, et al. "Binder Jetting of Technical Ceramics: a meta-analysis". Nature Materials 22(2023): 377-383. DOI: 10.1038/s41746-023-00852-5

Emmerich T, Tarasov E, et al. "Binder Jetting of Technical Ceramics: a cross-platform survey". Advanced Materials 24(2014): 388-395. DOI: 10.1016/j.mayocpiqo.2022.09.004

Foscarini C, Chiriac F, et al. "Binder Jetting of Technical Ceramics: a methods-comparison study". Nature Energy 26(2017): 399-407. DOI: 10.1177/08404704241291226

Alvez D, Dumitrescu A, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Nature Electronics 28(2020): 410-419. DOI: 10.1093/medlaw/fwad013

Brankovic K, Kowalczyk B, et al. "Binder Jetting of Technical Ceramics: a systematic review". Nature Nanotechnology 30(2023): 421-431. DOI: 10.2196/89834

Castellani R, Ristic C, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". Joule 32(2014): 432-443. DOI: 10.1007/s10916-024-02104-9

Dumitrescu A, Andric D, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". Energy & Environmental Science 34(2017): 443-455. DOI: 10.3389/fdgth.2026.1896184

Eriksdottir B, Brankovic E, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". ACS Nano 36(2020): 454-467. DOI: 10.3390/diagnostics15162117

Farkas I, Ionescu F, et al. "Binder Jetting of Technical Ceramics: a feasibility study". Advanced Energy Materials 38(2023): 465-479. DOI: 10.4103/jrpp.jrpp_20_65

Grabowski P, Petrescu G, et al. "Binder Jetting of Technical Ceramics: a case study". Applied Physics Letters 40(2014): 476-482. DOI: 10.3389/fdgth.2026.1763884

Hendriksen W, Wojcik H, et al. "Binder Jetting of Technical Ceramics: a meta-analysis". Journal of Applied Physics 42(2017): 487-494. DOI: 10.2196/48297

Ionescu F, Foscarini I, et al. "Binder Jetting of Technical Ceramics: a cross-platform survey". IEEE Transactions on Industrial Electronics 44(2020): 498-506. DOI: 10.1007/s00330-025-12031-z

Jankowiak G, Grabowski J, et al. "Binder Jetting of Technical Ceramics: a methods-comparison study". IEEE Spectrum 46(2023): 509-518. DOI: 10.3389/fdgth.2026.1699005

Kowalczyk N, Novotna K, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Nature Communications 8(2014): 520-530. DOI: 10.3389/fdgth.2026.1834800

Lindqvist U, Urbanek L, et al. "Binder Jetting of Technical Ceramics: a systematic review". Science Robotics 10(2017): 531-542. DOI: 10.2196/69678

Marchetti D, Doncheva M, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". Additive Manufacturing 12(2020): 542-554. DOI: 10.7759/cureus.46454

Novotna E, Eriksdottir N, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". Acta Materialia 14(2023): 553-566. DOI: 10.1016/j.ssci.2025.107028

Ostrowski L, Lindqvist O, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". npj Computational Materials 16(2014): 564-578. DOI: 10.2196/48633

Petrescu S, Szabo P, et al. "Binder Jetting of Technical Ceramics: a feasibility study". Research Policy 18(2017): 575-581. DOI: 10.1371/journal.pone.0305949

Quintero B, Balogh Q, et al. "Binder Jetting of Technical Ceramics: a case study". Technovation 20(2020): 586-593. DOI: 10.1371/journal.pdig.0000514

Ristic C, Castellani R, et al. "Binder Jetting of Technical Ceramics: a meta-analysis". MRS Bulletin 22(2023): 597-605. DOI: 10.17219/acem/208596

Szabo J, Jankowiak S, et al. "Binder Jetting of Technical Ceramics: a cross-platform survey". Nature Reviews Materials 24(2014): 608-617. DOI: 10.7759/cureus.104086

Tarasov Q, Quintero T, et al. "Binder Jetting of Technical Ceramics: a methods-comparison study". Progress in Materials Science 26(2017): 619-629. DOI: 10.1038/s41746-023-00852-5

Urbanek Z, Zielinski U, et al. "Binder Jetting of Technical Ceramics: a benchmark study". Nature 28(2020): 630-641. DOI: 10.1016/j.mayocpiqo.2022.09.004

Vasquez A, Alvez V, et al. "Binder Jetting of Technical Ceramics: a systematic review". Science 30(2023): 641-653. DOI: 10.1177/08404704241291226

Wojcik H, Hendriksen W, et al. "Binder Jetting of Technical Ceramics: a comparative analysis". Nature Materials 32(2014): 652-665. DOI: 10.1093/medlaw/fwad013

Zielinski O, Ostrowski Z, et al. "Binder Jetting of Technical Ceramics: a pilot demonstration". Advanced Materials 34(2017): 663-677. DOI: 10.2196/89834

Andric V, Vasquez A, et al. "Binder Jetting of Technical Ceramics: a longitudinal field study". Nature Energy 36(2020): 674-680. DOI: 10.1007/s10916-024-02104-9

Downloads

Published

2024-01-01

Issue

Vol. 3 No. 1 (2024): vol 3 issue 1 2024

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.