Additive Repair of High-Value Components: A Technical Note on Substrate Preparation and Qualification
DOI:
https://doi.org/10.5281/zenodo.22673890Keywords:
Additive Repair of High-Value Components; Next-generation R&D; Evidence synthesis; Reproducibility; Research methodologyAbstract
There is real interest in additive repair of high-value components right now, and real uncertainty about exactly where it delivers
the most value. We pull together the current evidence for additive repair of high-value components, covering the methodological,
practical, regulatory and cost angles, with an eye on where practice has genuinely settled and where engineers and reviewers are
still largely working it out for themselves. Selective, context-specific adoption looks better supported by the evidence gathered
here than either broad rollout or blanket avoidance
References
Alvez D, Dumitrescu A, et al. "Additive Repair of High-Value Components: a benchmark study". Nature 8(2014): 80-86. DOI: 10.3389/fdgth.2026.1896184
Brankovic K, Kowalczyk B, et al. "Additive Repair of High-Value Components: a systematic review". Science 10(2017): 91-98. DOI: 10.3390/diagnostics15162117
Castellani R, Ristic C, et al. "Additive Repair of High-Value Components: a comparative analysis". Nature Materials 12(2020): 102-110. DOI: 10.4103/jrpp.jrpp_20_65
Dumitrescu A, Andric D, et al. "Additive Repair of High-Value Components: a pilot demonstration". Advanced Materials 14(2023): 113-122. DOI: 10.3389/fdgth.2026.1763884
Eriksdottir B, Brankovic E, et al. "Additive Repair of High-Value Components: a longitudinal field study". Nature Energy 16(2014): 124-134. DOI: 10.2196/48297
Farkas I, Ionescu F, et al. "Additive Repair of High-Value Components: a feasibility study". Nature Electronics 18(2017): 135-146. DOI: 10.1007/s00330-025-12031-z
Grabowski P, Petrescu G, et al. "Additive Repair of High-Value Components: a case study". Nature Nanotechnology 20(2020): 146-158. DOI: 10.3389/fdgth.2026.1699005
Hendriksen W, Wojcik H, et al. "Additive Repair of High-Value Components: a meta-analysis". Joule 22(2023): 157-170. DOI: 10.3389/fdgth.2026.1834800
Ionescu F, Foscarini I, et al. "Additive Repair of High-Value Components: a cross-platform survey". Energy & Environmental Science 24(2014): 168-182. DOI: 10.2196/69678
Jankowiak G, Grabowski J, et al. "Additive Repair of High-Value Components: a methods-comparison study". ACS Nano 26(2017): 179-185. DOI: 10.7759/cureus.46454
Kowalczyk N, Novotna K, et al. "Additive Repair of High-Value Components: a benchmark study". Advanced Energy Materials 28(2020): 190-197. DOI: 10.1016/j.ssci.2025.107028
Lindqvist U, Urbanek L, et al. "Additive Repair of High-Value Components: a systematic review". Applied Physics Letters 30(2023): 201-209. DOI: 10.2196/48633
Marchetti D, Doncheva M, et al. "Additive Repair of High-Value Components: a comparative analysis". Journal of Applied Physics 32(2014): 212-221. DOI: 10.1371/journal.pone.0305949
Novotna E, Eriksdottir N, et al. "Additive Repair of High-Value Components: a pilot demonstration". IEEE Transactions on Industrial Electronics 34(2017): 223-233. DOI: 10.1371/journal.pdig.0000514
Ostrowski L, Lindqvist O, et al. "Additive Repair of High-Value Components: a longitudinal field study". IEEE Spectrum 36(2020): 234-245. DOI: 10.17219/acem/208596
Petrescu S, Szabo P, et al. "Additive Repair of High-Value Components: a feasibility study". Nature Communications 38(2023): 245-257. DOI: 10.7759/cureus.104086
Quintero B, Balogh Q, et al. "Additive Repair of High-Value Components: a case study". Science Robotics 40(2014): 256-269. DOI: 10.1038/s41746-023-00852-5
Ristic C, Castellani R, et al. "Additive Repair of High-Value Components: a meta-analysis". Additive Manufacturing 42(2017): 267-281. DOI: 10.1016/j.mayocpiqo.2022.09.004
Szabo J, Jankowiak S, et al. "Additive Repair of High-Value Components: a cross-platform survey". Acta Materialia 44(2020): 278-284. DOI: 10.1177/08404704241291226
Tarasov Q, Quintero T, et al. "Additive Repair of High-Value Components: a methods-comparison study". npj Computational Materials 46(2023): 289-296. DOI: 10.1093/medlaw/fwad013
Urbanek Z, Zielinski U, et al. "Additive Repair of High-Value Components: a benchmark study". Research Policy 8(2014): 300-308. DOI: 10.2196/89834
Vasquez A, Alvez V, et al. "Additive Repair of High-Value Components: a systematic review". Technovation 10(2017): 311-320. DOI: 10.1007/s10916-024-02104-9
Wojcik H, Hendriksen W, et al. "Additive Repair of High-Value Components: a comparative analysis". MRS Bulletin 12(2020): 322-332. DOI: 10.3389/fdgth.2026.1896184
Zielinski O, Ostrowski Z, et al. "Additive Repair of High-Value Components: a pilot demonstration". Nature Reviews Materials 14(2023): 333-344. DOI: 10.3390/diagnostics15162117
Andric V, Vasquez A, et al. "Additive Repair of High-Value Components: a longitudinal field study". Progress in Materials Science 16(2014): 344-356. DOI: 10.4103/jrpp.jrpp_20_65
Balogh E, Emmerich B, et al. "Additive Repair of High-Value Components: a feasibility study". Nature 18(2017): 355-368. DOI: 10.3389/fdgth.2026.1763884
Chiriac F, Farkas C, et al. "Additive Repair of High-Value Components: a case study". Science 20(2020): 366-380. DOI: 10.2196/48297
Doncheva M, Marchetti D, et al. "Additive Repair of High-Value Components: a meta-analysis". Nature Materials 22(2023): 377-383. DOI: 10.1007/s00330-025-12031-z
Emmerich T, Tarasov E, et al. "Additive Repair of High-Value Components: a cross-platform survey". Advanced Materials 24(2014): 388-395. DOI: 10.3389/fdgth.2026.1699005
Foscarini C, Chiriac F, et al. "Additive Repair of High-Value Components: a methods-comparison study". Nature Energy 26(2017): 399-407. DOI: 10.3389/fdgth.2026.1834800
Alvez D, Dumitrescu A, et al. "Additive Repair of High-Value Components: a benchmark study". Nature Electronics 28(2020): 410-419. DOI: 10.2196/69678
Brankovic K, Kowalczyk B, et al. "Additive Repair of High-Value Components: a systematic review". Nature Nanotechnology 30(2023): 421-431. DOI: 10.7759/cureus.46454
Castellani R, Ristic C, et al. "Additive Repair of High-Value Components: a comparative analysis". Joule 32(2014): 432-443. DOI: 10.1016/j.ssci.2025.107028
Dumitrescu A, Andric D, et al. "Additive Repair of High-Value Components: a pilot demonstration". Energy & Environmental Science 34(2017): 443-455. DOI: 10.2196/48633
Eriksdottir B, Brankovic E, et al. "Additive Repair of High-Value Components: a longitudinal field study". ACS Nano 36(2020): 454-467. DOI: 10.1371/journal.pone.0305949
Farkas I, Ionescu F, et al. "Additive Repair of High-Value Components: a feasibility study". Advanced Energy Materials 38(2023): 465-479. DOI: 10.1371/journal.pdig.0000514
Grabowski P, Petrescu G, et al. "Additive Repair of High-Value Components: a case study". Applied Physics Letters 40(2014): 476-482. DOI: 10.17219/acem/208596
Hendriksen W, Wojcik H, et al. "Additive Repair of High-Value Components: a meta-analysis". Journal of Applied Physics 42(2017): 487-494. DOI: 10.7759/cureus.104086
Ionescu F, Foscarini I, et al. "Additive Repair of High-Value Components: a cross-platform survey". IEEE Transactions on Industrial Electronics 44(2020): 498-506. DOI: 10.1038/s41746-023-00852-5
Jankowiak G, Grabowski J, et al. "Additive Repair of High-Value Components: a methods-comparison study". IEEE Spectrum 46(2023): 509-518. DOI: 10.1016/j.mayocpiqo.2022.09.004
Kowalczyk N, Novotna K, et al. "Additive Repair of High-Value Components: a benchmark study". Nature Communications 8(2014): 520-530. DOI: 10.1177/08404704241291226
Lindqvist U, Urbanek L, et al. "Additive Repair of High-Value Components: a systematic review". Science Robotics 10(2017): 531-542. DOI: 10.1093/medlaw/fwad013
Marchetti D, Doncheva M, et al. "Additive Repair of High-Value Components: a comparative analysis". Additive Manufacturing 12(2020): 542-554. DOI: 10.2196/89834
Novotna E, Eriksdottir N, et al. "Additive Repair of High-Value Components: a pilot demonstration". Acta Materialia 14(2023): 553-566. DOI: 10.1007/s10916-024-02104-9
Ostrowski L, Lindqvist O, et al. "Additive Repair of High-Value Components: a longitudinal field study". npj Computational Materials 16(2014): 564-578. DOI: 10.3389/fdgth.2026.1896184
Petrescu S, Szabo P, et al. "Additive Repair of High-Value Components: a feasibility study". Research Policy 18(2017): 575-581. DOI: 10.3390/diagnostics15162117
Quintero B, Balogh Q, et al. "Additive Repair of High-Value Components: a case study". Technovation 20(2020): 586-593. DOI: 10.4103/jrpp.jrpp_20_65
Ristic C, Castellani R, et al. "Additive Repair of High-Value Components: a meta-analysis". MRS Bulletin 22(2023): 597-605. DOI: 10.3389/fdgth.2026.1763884
Szabo J, Jankowiak S, et al. "Additive Repair of High-Value Components: a cross-platform survey". Nature Reviews Materials 24(2014): 608-617. DOI: 10.2196/48297
Tarasov Q, Quintero T, et al. "Additive Repair of High-Value Components: a methods-comparison study". Progress in Materials Science 26(2017): 619-629. DOI: 10.1007/s00330-025-12031-z
Urbanek Z, Zielinski U, et al. "Additive Repair of High-Value Components: a benchmark study". Nature 28(2020): 630-641. DOI: 10.3389/fdgth.2026.1699005
Vasquez A, Alvez V, et al. "Additive Repair of High-Value Components: a systematic review". Science 30(2023): 641-653. DOI: 10.3389/fdgth.2026.1834800
Wojcik H, Hendriksen W, et al. "Additive Repair of High-Value Components: a comparative analysis". Nature Materials 32(2014): 652-665. DOI: 10.2196/69678
Zielinski O, Ostrowski Z, et al. "Additive Repair of High-Value Components: a pilot demonstration". Advanced Materials 34(2017): 663-677. DOI: 10.7759/cureus.46454
Andric V, Vasquez A, et al. "Additive Repair of High-Value Components: a longitudinal field study". Nature Energy 36(2020): 674-680. DOI: 10.1016/j.ssci.2025.107028
