Electrode Coating Uniformity in Roll-to-Roll Production: A Technical Note on In-Line Metrology

Authors

  • Hermione Dovecote Department of Manufacturing Engineering, Dartmoor Institute of Advanced Technology, Okehampton, United Kingdom Author
  • Fabianne Magro Department of Metrology, Siggiewi Centre for Emerging Materials, Siggiewi, Malta Author
  • Estanislau Carvalhosa Centre for Energy Storage, Costa Vicentina Centre for Emerging Materials, Odemira, Portugal Author

DOI:

https://doi.org/10.5281/zenodo.22674056

Keywords:

Electrode Coating Uniformity in Roll-to-Roll Production; Next-generation R&D; Evidence synthesis; Reproducibility; Research methodology

Abstract

There is real interest in electrode coating uniformity in roll-to-roll production right now, and real uncertainty about exactly where
it delivers the most value. We pull together the current evidence for electrode coating uniformity in roll-to-roll production,
covering the methodological, practical, regulatory and cost angles, with an eye on where practice has genuinely settled and where
engineers and reviewers are still largely working it out for themselves. Selective, context-specific adoption looks better supported
by the evidence gathered here than either broad rollout or blanket avoidance.

References

Alvez D, Dumitrescu A, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Nature 8(2014): 80-86. DOI: 10.3389/fdgth.2026.1699005

Brankovic K, Kowalczyk B, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Science 10(2017): 91-98. DOI: 10.3389/fdgth.2026.1834800

Castellani R, Ristic C, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". Nature Materials 12(2020): 102-110. DOI: 10.2196/69678

Dumitrescu A, Andric D, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". Advanced Materials 14(2023): 113-122. DOI: 10.7759/cureus.46454

Eriksdottir B, Brankovic E, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". Nature Energy 16(2014): 124-134. DOI: 10.1016/j.ssci.2025.107028

Farkas I, Ionescu F, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a feasibility study". Nature Electronics 18(2017): 135-146. DOI: 10.2196/48633

Grabowski P, Petrescu G, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a case study". Nature Nanotechnology 20(2020): 146-158. DOI: 10.1371/journal.pone.0305949

Hendriksen W, Wojcik H, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a meta-analysis". Joule 22(2023): 157-170. DOI: 10.1371/journal.pdig.0000514

Ionescu F, Foscarini I, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a cross-platform survey". Energy & Environmental Science 24(2014): 168-182. DOI:

17219/acem/208596 10. Jankowiak G, Grabowski J, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a methods-comparison study". ACS Nano 26(2017): 179-185. DOI: 10.7759/cureus.104086

Kowalczyk N, Novotna K, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Advanced Energy Materials 28(2020): 190-197. DOI: 10.1038/s41746-023-00852-5

Lindqvist U, Urbanek L, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Applied Physics Letters 30(2023): 201-209. DOI: 10.1016/j.mayocpiqo.2022.09.004

Marchetti D, Doncheva M, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". Journal of Applied Physics 32(2014): 212-221. DOI: 10.1177/08404704241291226

Novotna E, Eriksdottir N, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". IEEE Transactions on Industrial Electronics 34(2017): 223-233. DOI: 10.1093/medlaw/fwad013

Ostrowski L, Lindqvist O, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". IEEE Spectrum 36(2020): 234-245. DOI: 10.2196/89834

Petrescu S, Szabo P, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a feasibility study". Nature Communications 38(2023): 245-257. DOI: 10.1007/s10916-024-02104-9

Quintero B, Balogh Q, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a case study". Science Robotics 40(2014): 256-269. DOI: 10.3389/fdgth.2026.1896184

Ristic C, Castellani R, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a meta-analysis". Additive Manufacturing 42(2017): 267-281. DOI: 10.3390/diagnostics15162117

Szabo J, Jankowiak S, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a cross-platform survey". Acta Materialia 44(2020): 278-284. DOI: 10.4103/jrpp.jrpp_20_65

Tarasov Q, Quintero T, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a methods-comparison study". npj Computational Materials 46(2023): 289-296. DOI: 10.3389/fdgth.2026.1763884

Urbanek Z, Zielinski U, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Research Policy 8(2014): 300-308. DOI: 10.2196/48297

Vasquez A, Alvez V, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Technovation 10(2017): 311-320. DOI: 10.1007/s00330-025-12031-z

Wojcik H, Hendriksen W, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". MRS Bulletin 12(2020): 322-332. DOI: 10.3389/fdgth.2026.1699005

Zielinski O, Ostrowski Z, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". Nature Reviews Materials 14(2023): 333-344. DOI: 10.3389/fdgth.2026.1834800

Andric V, Vasquez A, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". Progress in Materials Science 16(2014): 344-356. DOI: 10.2196/69678

Balogh E, Emmerich B, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a feasibility study". Nature 18(2017): 355-368. DOI: 10.7759/cureus.46454

Chiriac F, Farkas C, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a case study". Science 20(2020): 366-380. DOI: 10.1016/j.ssci.2025.107028

Doncheva M, Marchetti D, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a meta-analysis". Nature Materials 22(2023): 377-383. DOI: 10.2196/48633

Emmerich T, Tarasov E, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a cross-platform survey". Advanced Materials 24(2014): 388-395. DOI: 10.1371/journal.pone.0305949

Foscarini C, Chiriac F, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a methods-comparison study". Nature Energy 26(2017): 399-407. DOI: 10.1371/journal.pdig.0000514

Alvez D, Dumitrescu A, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Nature Electronics 28(2020): 410-419. DOI: 10.17219/acem/208596

Brankovic K, Kowalczyk B, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Nature Nanotechnology 30(2023): 421-431. DOI: 10.7759/cureus.104086

Castellani R, Ristic C, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". Joule 32(2014): 432-443. DOI: 10.1038/s41746-023-00852-5

Dumitrescu A, Andric D, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". Energy & Environmental Science 34(2017): 443-455. DOI: 10.1016/j.mayocpiqo.2022.09.004

Eriksdottir B, Brankovic E, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". ACS Nano 36(2020): 454-467. DOI: 10.1177/08404704241291226

Farkas I, Ionescu F, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a feasibility study". Advanced Energy Materials 38(2023): 465-479. DOI: 10.1093/medlaw/fwad013

Grabowski P, Petrescu G, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a case study". Applied Physics Letters 40(2014): 476-482. DOI: 10.2196/89834

Hendriksen W, Wojcik H, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a meta-analysis". Journal of Applied Physics 42(2017): 487-494. DOI: 10.1007/s10916-024-02104-9

Ionescu F, Foscarini I, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a cross-platform survey". IEEE Transactions on Industrial Electronics 44(2020): 498-506. DOI: 10.3389/fdgth.2026.1896184

Jankowiak G, Grabowski J, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a methods-comparison study". IEEE Spectrum 46(2023): 509-518. DOI: 10.3390/diagnostics15162117

Kowalczyk N, Novotna K, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Nature Communications 8(2014): 520-530. DOI: 10.4103/jrpp.jrpp_20_65

Lindqvist U, Urbanek L, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Science Robotics 10(2017): 531-542. DOI: 10.3389/fdgth.2026.1763884

Marchetti D, Doncheva M, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". Additive Manufacturing 12(2020): 542-554. DOI: 10.2196/48297

Novotna E, Eriksdottir N, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". Acta Materialia 14(2023): 553-566. DOI: 10.1007/s00330-025-12031-z

Ostrowski L, Lindqvist O, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". npj Computational Materials 16(2014): 564-578. DOI: 10.3389/fdgth.2026.1699005

Petrescu S, Szabo P, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a feasibility study". Research Policy 18(2017): 575-581. DOI: 10.3389/fdgth.2026.1834800

Quintero B, Balogh Q, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a case study". Technovation 20(2020): 586-593. DOI: 10.2196/69678

Ristic C, Castellani R, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a meta-analysis". MRS Bulletin 22(2023): 597-605. DOI: 10.7759/cureus.46454

Szabo J, Jankowiak S, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a cross-platform survey". Nature Reviews Materials 24(2014): 608-617. DOI: 10.1016/j.ssci.2025.107028

Tarasov Q, Quintero T, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a methods-comparison study". Progress in Materials Science 26(2017): 619-629. DOI: 10.2196/48633

Urbanek Z, Zielinski U, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a benchmark study". Nature 28(2020): 630-641. DOI: 10.1371/journal.pone.0305949

Vasquez A, Alvez V, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a systematic review". Science 30(2023): 641-653. DOI: 10.1371/journal.pdig.0000514

Wojcik H, Hendriksen W, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a comparative analysis". Nature Materials 32(2014): 652-665. DOI: 10.17219/acem/208596

Zielinski O, Ostrowski Z, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a pilot demonstration". Advanced Materials 34(2017): 663-677. DOI: 10.7759/cureus.104086

Andric V, Vasquez A, et al. "Electrode Coating Uniformity in Roll-to-Roll Production: a longitudinal field study". Nature Energy 36(2020): 674-680. DOI: 10.1038/s41746-023-00852-5

Downloads

Published

2026-04-15

Issue

Vol. 5 No. 1 (2026): vol 5 issue 1 2026

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.